Up to 1800 sq.m in -one section
Firestone PondGard - Seaming and Repair products
Firestone QuickSeam™ splicing products form the best possible solution for field seaming, joining and repairing EPDM Liner.
We supply the full range of these products in a variety of full pack and split pack quantities. We also provide a free quick reference seaming guide for use by Firestone trained installers in addition to the full Firestone Installation Manual.
Gordon Low Products Ltd
Easy Maintenance
PondGard Rubber Liners require virtually no maintenance after installation. And in the unlikely event of a puncture, the liner can be quickly repaired on-site with a self-adhesive QuickSeam Joint Cover Patch, minimizing cost and inconvenience. PondGard liners display outstanding resistance to UV exposure, ozone, frost, snow and extreme temperatures. Developed to protect against microbial attacks and algae growth, our liners contain no migrating plasticizers – which means no cracking or splitting. This means twenty years after installation; many water features built with PondGard Rubber Liner are as functional and beautiful as the day they were installed.
Not Trade ?
© 2009 Gordon Low Products Ltd
This kit contains everything you need for a small liner patch repair,
including 2x EPDM patches, a roller, a scrubber pad, 1 small bottle of
primer, a pair of disposable gloves and instructions. Works equally well
on Greenseal liners too.
View a Firestone video - Detail 05 -how to apply a repair patch
Download a .pdf version of the instructions
Firestone QuickSeam™ Components and Accessories
QuickSeam™ 3" Splice Tape for field seaming of Firestone EPDM PondGard panels. Used with QuickPrime Plus Primer and a QuickScrubber pad to clean and prime mating surfaces. Supplied as a 76mm x 30.48 m (3.0” x 100ft) roll or part roll cut to the nearest 0.5m.
QuickSeam™ 9" Form Flash is a 228mm (9") wide, uncured EPDM flashing laminated to cured seam tape. QuickSeam FormFlash is used to flash inside and outside corners, reinforce lap seams, cover repairs, pipe penetrations pockets and other applications as specified by Firestone Installation Guidelines. Supplied as a 228 mm x 15.24 m (9.0” x 50ft) full roll (or part roll cut to the nearest 0.5m). Thickness: 1.6 mm (0.065” ). Used with QuickPrime Plus Primer and a QuickScrubber pad and handle to clean and prime mating surfaces.
QuickSeam 18" SA Flashing is used for lap cover repairs and reinforcing seams etc.This product consists of a cured membrane with quickseam tape already applied. It is applied to the liner using quickprime plus.
Download the Firestone .pdf specification sheet.
QuickSeam™ Universal Pipe Sleeve (Moulded EPDM) For sealing around pipe penetrations. Suitable for pipe sizes: 25.4 mm - 174.6 mm (1.0" - 6.875") O.D.
Comes complete with QuickSeam Tape already applied to flange and Stainless Steel clamp to secure to pipe. Base Flange: 330 mm (13.0") O.D.
Note: Installation requires QuickPrimePlus Primer, Scrubber Pad, Hand roller, Water Block Seal and Lap Sealant .
Fits the Pipe Outside Diameters listed below:
- 25.4 mm - 34.9 mm (1.0" - 1.375")
- 41.3 mm - 47.6 mm (1.625" - 1.875")
- 50.8 mm - 66.7 mm (2.0" - 2.625")
- 69.8 mm - 92.1 mm (2.75" - 3.625")
- 102.0 mm - 114.0 mm (4.0" - 4.50")
- 127.0 mm - 141.0 mm (5.0" - 5.50")
- 152.4 mm - 174.6 mm (6.0" - 6.875")
Download the Firestone Pipe Sleeve installation instructions
View a Firestone video - Detail 07 - Creating a Seam with 3" (7.62 cm) QuickSeam Splice Tape
See our download page for the Firestone Technical Seaming Guides and for full details on these and other easy-to-follow installation techniques..
By using this website you agree to our terms and conditions - click here to view.