Attenuation Pond liners

Commercial drainage systems used to control the rate, volume and quality of storm water run-off from commercial development projects are referred to as Sustainable Urban Drainage Systems (SUDS). These systems are intended to help avoid an increase in flood risk and will help to maintain natural water flow by encouraging storm water to soak into the ground or, where that is not reasonably practicable, will discharge it into watercourses or surface water/combined sewers at a controlled rate. These methods include balancing ponds, attenuation ponds and soakaways.

Gordon Low Products Ltd are a leading UK manufacturer and supplier of EPDM and Butyl Rubber pond liners used for attenuation ponds.

Gordon Low Attenuation Pond

 

The picture above shows the construction of an Attenuation Pond lined with Firestone EPDM liner. See more of this project here.

Rainwater is also collected in underground attenuation tanks created using a box-welded EPDM liner, plastic attenuation crates and then sealed with an EPDM flap or lid. This type of construction is often used for SUDS applications relating to new housing developments, car parking and other controlled soak away systems.

box welded Attenuation liner

We are a trade supplier and if you would like advice on our different pond liner products, or help to purchase our products, we welcome your call.

UK sales office : 01480 405433

 


Contact Us

GORDON LOW PRODUCTS LTD
ROOKERY ROAD, WYBOSTON,
BEDFORDSHIRE. MK44 3UG
TEL: 01480 405 433

 

Send Emailcontact us