GORDON LOW PRODUCTS - official SealEco Manufacturing Partner

As a SealEco Authorised Manufacturing Partner, Gordon Low Products have fulfilled the requirements of the SealEco Manufacturing Partner Agreement. In short, this means we are fully authorised by SealEco to prefabricate (hot bond weld/vulcanise) pond liner sheets and water storage tank liners in the UK, from raw material rolls supplied by the membrane producer, SealEco AB. However, not only has the fabricator to be an experienced firm customarily engaged in factory fabrication of EPDM or similar roll goods into large prefabricated panels by thermo-fusion and/or hot bond vulcanisation methods, but the fabricator and their manufacturing processes and documentation methods shall also be approved by the EPDM manufacturer. For example, the fabricator shall maintain panel fabrication QC documentation to include the following information:

1. Project number/customer order (manufacturing order number), associated panel size, date of fabrication, name of fabricator etc.

2. Tracability of all associated SealEco EPDM roll numbers with manufacturers documentation. (ie. roll, lot and batch numbers, date of manufacture, etc.).

3. Records of visual inspections and seam testing.

4. Each fabricated panel/sheet shall be rolled and/or folded and packaged with protective cardboard or plastic or rubber membrane wrapping with prominent and unique identification as to panel number/size and markings indicating direction of unrolling/unfolding to facilitate layout and positioning according to the panel layout drawings.

All this information is recorded on our computerised manufacturing system but is also displayed on our unique yellow product labels.

See an example of our unique product labels on our quality page.