Pond liner seaming products
Professional joining systems for accessories and repairs
UK TRADE ENQUIRIES TEL: 01480 405433
 

 GORDON LOW SEAMING & REPAIR - Kits, adhesives, tapes, accessories.

 

Firestone QuickSeam™ splicing products form the best possible solution for on-site seaming, joining and repairing EPDM Liner.

We supply the full range of these products in a choice of full pack or split pack quantities.

For larger projects we are happy to recommended Trained Firestone Installers in your area for installation and site seaming of Firestone PondGard EPDM liners.


 FIRESTONE QUICKSEAM REPAIR KIT

 

epdm rubber

Firestone QuickSeam repair kit includes all the components and equipment necessary for small simple patch repairs. This kit includes two self-adhesive FormFlash EPDM patches and a small bottle of the QuickPrimePlus liner cleaner/preparation fluid.

Applied using the green scrubber pad, the QPP fluid cleans the surface of the liner and acts as a primer agent for the self-adhesive tape backing on the patch. Once applied the patch creates a strong watertight repair.

WATCH THE TUTORIAL OR DOWNLOAD THE INSTRUCTION SHEET

 UNIVERSAL AND TAILOR-MADE PIPE SLEEVES

 

butyl rubber

WATCH THE FITTING TUTORIAL FOR A GORDON LOW PIPESLEEVE.....

QuickSeam™ Universal Pipe Sleeve (Moulded EPDM) For sealing around liner pipe penetrations. Suitable for pipe sizes: 25.4 mm - 174.6 mm (1.0" - 6.875") O.D. Sleeve has moulded steps for the Pipe Outside Diameters listed below:

25.4 mm - 34.9 mm (1.0" - 1.375") 41.3 mm - 47.6 mm (1.625" - 1.875")

50.8 mm - 66.7 mm (2.0" - 2.625") 69.8 mm - 92.1 mm (2.75" - 3.625")

102.0 mm - 114.0 mm (4.0" - 4.50") 127.0 mm - 141.0 mm (5.0" - 5.50")

152.4 mm - 174.6 mm (6.0" - 6.875")

Comes complete with QuickSeam Tape already applied to flange and Stainless Steel clamp to secure to pipe. Base Flange: 330 mm (13.0") O.D. (Note: Installation requires QuickPrimePlus Primer, Scrubber Pad, Hand roller, Water Block Seal and Lap Sealant).

DOWNLOAD THE INSTRUCTION SHEET

 

 

< TAILOR-MADE pipe sleeves are made to order to suit which ever pipe size you require. We fabricate these from EPDM or BUTYL pond liner sheet and are also applied using the QuickSeam™ system.

 

WATCH THE TUTORIAL

 QUICKSEAM SPLICE TAPE AND FORMFLASH

  pvc pond liner

QuickSeam™ 3" Splice Tape for field seaming of Firestone EPDM PondGard panels. Used with QuickPrime Plus Primer and a QuickScrubber pad to clean and prime mating surfaces. Supplied as a 76mm x 30.48 m (3.0” x 100ft) roll or part roll cut to the nearest 0.5m.

QuickSeam™ 9" Form Flash is a 228mm (9") wide, uncured EPDM flashing laminated to cured seam tape. QuickSeam FormFlash is used to flash inside and outside corners, reinforce lap seams, cover repairs, pipe penetrations pockets and other applications as specified by Firestone Installation Guidelines. Supplied as a 228 mm x 15.24 m (9.0” x 50ft) full roll (or part roll cut to the nearest 0.5m). Thickness: 1.6 mm (0.065” ). Used with QuickPrime Plus Primer and a QuickScrubber pad and handle to clean and prime mating surfaces.

QuickSeam 18" SA Flashing is used for lap cover repairs and reinforcing seams etc.This product consists of a cured membrane with quickseam tape already applied. It is applied to the liner using quickprime plus.

QuickPrimePlus is the solvent designed to clean and prime the EPDM membrane prior to application of QuickSeam products. QuickPrimePlus is applied to the membrane manually with a Quickscrubber Pad and Handle.

Watch the Firestone Seaming tutorial here >

 

 

For larger projects we are happy to recommended Firestone Trained Installers in your area for installation and site seaming of Firestone PondGard EPDM liners.

 

When using Firestone Seaming Products follow all appropriate Safety Guidelines.

For Material Safety Data Sheets please go to:-

www.firestonelining.eu/lining/tech_data/msds/_en/index.shtm 

 

visit the OATA website Visit the PondConservation website sealeco partner micro-site